Hole Drilling EDM
AGIE CHARMILLES DRILL E 300 is a high-speed drill machine widely used for drilling starting holes. In aerospace for aircraft engines, as well as gas turbines in energy production, cooling holes are needed for creating a film of cooling air on the surface of turbine blades and vanes to prevent them from overheating.
With numerical control axes X,Y and Z , AgieCharmilles DRILL E 300 is widely used for drilling starting holes with the electrode range Ø 0.3 – 3.0 mm and with electrode materials brass, copper and carbide, and workpiece materials steel and carbide.
Simple data input and great application spectrum
Short setup time
Process monitoring and optimization are implemented via the operator console.
Numerical controlled axes X, Y and Z with travel paths of 300 x 200 x 300 mm, and a variety of touching cycles offers convenience for the operator when set up.
Simple data input and great application spectrum
The axes X, Y and Z are motor powered and controlled by CNC. The data input on the operator console is quick and simple. Technology settings are selected automatically by material electrode / piece, piece height and electrode diameter. Touching cycles can be programmed and called up with a few commands
- Wide range of technologies for material steel, hard metal, aluminium and copper etc.
- Fast programming and erosion for multi-holes with different diameters and technologies
- Fast set up cycles such as edge finding, center finding and corner finding with touch screen
- Electrode diameter 0.3 up to 3 mm (option: 0.10, 0.15, 0.20 mm)
- Maximum drilling depth 200 mm
- Maximum workpiece weight 300 kg
- Travel paths of axes X, Y and Z 300 x 200 x 300 mm
- Worktable size (width x length) 400 x 300 mm
- Rotating spindle 57.5 rpm
- Travel path of the electrode guide 100 mm
- Heavy duty generator 30 A Dielectric volume 16 l
- Mains connections 3 x 400 V 50/60 Hz
- Maximum power consumption 5 kW
- Display TFT Touch screen, 12.1”
- Pump operating pressure 70 bar
- Machine dimensions 1345 x 940 x 2040 mm
- Total weight of the machine 870 kg
- Options: fine drill holders and guides, filtration system, deionization unit, AC CAM DRILL
