Mitutoyo Lever dial indicator contact point length 33.9 mm 0,25/33 mm
$295.60

Mitutoyo

Mitutoyo Lever dial indicator contact point length 33.9 mm 0,25/33 mm

Description

Version:

Lever dial indicator with long contact point. 1/100 reading.
Housing without dovetails. With changeover lever for changing the direction of measurement. Mounting shank screwed in.
High-precision lever dial indicator with jewel-mounted mechanism, in handy, robust design. Housing and dovetail block are of one piece, which means that mounting is particularly rigid. Corrosion protection due to matt chrome-plated housing.
Mitutoyo − ruby mounted mechanism with carbide measurement ball. Unaffected by magnetic fields.

Application:

As an accurate dial bore gauge for testing variations from nominal size, testing concentricity, internal measurements, testing of parallelism, and flatness as well as for aligning components.

Supplied with:

Clamping spigot ⌀ 8 mm.

Optional extras:

Square holder No. 436510, centring holder No. 436512, knuckle stand No. 359680.

Spare part:

Spare contact point with carbide or ruby ball available on request.

Note:

Additional information DIN 2270: Graduations 0.01 − deviation range 10 µm, total deviation range 13 µm, hysteresis error 3 µm.

Technical Data

Standard
DIN 2270
Measuring range per direction
0.25 mm
Scale divisions
0.01 mm
Variation range fe
10 µm
Total var

Description

Version:

Lever dial indicator with long contact point. 1/100 reading.
Housing without dovetails. With changeover lever for changing the direction of measurement. Mounting shank screwed in.
High-precision lever dial indicator with jewel-mounted mechanism, in handy, robust design. Housing and dovetail block are of one piece, which means that mounting is particularly rigid. Corrosion protection due to matt chrome-plated housing.
Mitutoyo − ruby mounted mechanism with carbide measurement ball. Unaffected by magnetic fields.

Application:

As an accurate dial bore gauge for testing variations from nominal size, testing concentricity, internal measurements, testing of parallelism, and flatness as well as for aligning components.

Supplied with:

Clamping spigot ⌀ 8 mm.

Optional extras:

Square holder No. 436510, centring holder No. 436512, knuckle stand No. 359680.

Spare part:

Spare contact point with carbide or ruby ball available on request.

Note:

Additional information DIN 2270: Graduations 0.01 − deviation range 10 µm, total deviation range 13 µm, hysteresis error 3 µm.

Technical Data

Standard DIN 2270
Measuring range per direction 0.25 mm
Scale divisions 0.01 mm
Variation range f10 µm
Total variation range ftot 13 µm
Hysteresis error f3 µm
Measurement ball ⌀ 2 mm
Pivot range 2×110 degrees
Contact point length 33.9 mm
Gauging force 0.3 N
Clamping shank ⌀ h6 8 mm
Measurement technology analogue
Body ⌀ 33 mm
Packaging sturdy box
Calibration C5
Type of product Lever dial indicator